Brembo rubber bleed nipple cap without retaining ring

 More than 5 in stock

Single stainless steel M10 banjo bolt with bleed nipple for Brembo fittings. Supplied with bleed nipple cap and crush washers. Perfect for bleeding up old P9, F08 and F05 calipers where the bleed nipple has broken off. This can also be used to add additional bleed points to linked systems where airlocks are causing problems

These can be used to replace the standard banjo bolt on CARC models. See alternative part BRA41653 for Stahlbus auto bleed banjo bolt

 More than 5 in stock

Also fits Benelli 250 TS

500ml AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis

Mixes safely with other DOT 3, DOT 4 and DOT 5.1 brake and clutch fluids.

See BRA99013 for high performance alternative.

If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650

Please note this part CANNOT be posted outside of the UK mainland area

 More than 5 in stock

Bright zinc finish M8 hex head bolt, used as rear brake disc bolts on Le Mans 3 etc...

Rear disc bolt

 More than 5 in stock

 98052450 GU98052450 98 05 24 50
 9805 2450 9805.2450 98.05.24.50

49cm length of black pipe with clips for connecting rear master cylinder to brake fluid reservoir

Brake fluid, oil and fuel resistant. We recommend measuring your existing pipe first to check ensure this 49cm pipe will be long enough. This is not long enough for the rear brake master cylinder on V50 II and V35 I

 More than 5 in stock

Hex head brake disc bolt for front discs

Also known as Guzzi ref. 03611445. 6 bolts required per disc. Some models use shorter FRA81285 which is M8 x 16- checks parts book for exact listing

 More than 5 in stock

AP8152286

Bright zinc finish M8 hex head bolt, used as rear brake disc bolts on T3 etc...

Rear disc bolt for T3. 6 bolts required per disc

 More than 5 in stock

 98052445 GU98052445 98 05 24 45
 9805 2445 9805.2445 98.05.24.45

Brembo brake master cylinder overhaul kit for handlebar, undertank (cable operated) mounted, handlebar mounted and rear PS 12 master cylinders. Contains seals, brake grease, spring and piston. PS12 handlebar master cylinder fitted to early 850 and 1000 models. PS12 rear master cylinder fitted to Nevada 750

This seal kit is also known as 082039797. NB repair kit instructions refer to rear master cylinder. To fit this to a PS12 handlebar mounted cylinder you will need to punch the old piston out using a thin drift through the hole at the banjo bolt end of the master cylinder. Carefully note the order of the ring and washer as the piston comes out and replace with components from kit. Brembo no. 110279720. See this link for help with fitting this kit

 More than 5 in stock

 17659352 GU17659352 17 65 93 52
 1765 9352 1765.9352 17.65.93.52

Also fits Ducati 500 SL Pantah, Ducati 350/500 Twin GTV, Ducati 350/500 SL Pantah, Benelli 500 Quattro, Benelli 504 Sport, Benelli 250 2C, Benelli 900 Sei, Laverda Montjuic, Harris F1

Circlip used for retaining brake disc on Tonti framed models, used for gearbox applications on later bikes

 More than 5 in stock

 90271022 GU90271022 90 27 10 22
 9027 1022 9027.1022 90.27.10.22

Upper short spring for rear brake shoes

 More than 5 in stock

25638200-z 25638200 GU25638200 25 63 82 00
 2563 8200 2563.8200 25.63.82.00